Please note bolts are not included and must be purchased separately. Generally used to seal the ends of a pipeline or any connection. 113 PN16/4. - SCREWED BSPT -  RAISED FACE BS4504 Table 16 Size ...

Generally used to seal the ends of a pipeline or any connection. *Please note bolts are not included and must be purchased separately. 113 PN16/4 - SCREWED BSPT -  RAISED FACE BS4504 Table 16 Size ...

These fittings are generally used to seal the ends of a pipeline or any connection. *Please note bolts are not included and must be purchased separately. 113 PN16/4. - SCREWED BSPT -  RAISED FACE BS4504...

1.5mm Novus Supra Will suit flanges PN6, PN10, PN16, PN25, PN40. Max Temperature 350°c. BS 7531 WRC, Non-asbestos.

Carbon Steel Screwed BSPT Flange - Table 'E' SCREWED BSPT -  FLAT FACE Please note bolts are not included and must be purchased separately. Generally used to seal the ends of a pipeline or any...

To suit Table E, Full Face Flanges 1.5mm Novus Supra BS 7531 WRC Non-asbestos Table E Full Face Maximum Temperature 350°C.

Slip on weld flanges are generally used to seal the ends of a pipeline or any connection. *Please note bolts are not included and must be purchased separately. 101 PN16/3. - SLIP ON WELD PLATE...

Please note bolts are not included and must be purchased separately. Generally used to seal the ends of a pipeline or any connection. 101 PN16/3. - Plate with a RAISED FACE for joining together with...

Weld Flanges are most commonly used to seal the ends of a pipeline, or any connection. *Please note bolts are not included and must be purchased separately.    

Bright Zinc Plated Bolt Sets to Suit PN16 Flanges Comprising of 1 x Bolt, 1 x Nut and 1 x Washer, amount depending on the size of flange 4 x 1/2" To 2 1/2",  8...

EPDM Bellows, Zinc Plated Carbon Steel Flanges, Rated PN16 Maximum Operating Temperature -20°C to 100°C WRAS Approved. 8" Will suit both PN10 & PN16

Flanged PN16 NBR Bellows Galvanized Carbon Steel Flanges, Temperature -10°C to 80°C. 

Please note bolts are not included and must be purchased separately. Generally used to seal the ends of a pipeline or any connection. 105 PN16/8. - BLANK FLANGE -  RAISED FACE BS4504 Table 16 Size  Dia...

Blank Flanges are generally used to seal the ends of a pipeline or any connection. *Please note bolts are not included and must be purchased separately. 105 PN16/8. - Plate Flat Face BS4504 Table 16...

ABS Blank Flange - PN16 are made from the material acrylonitrile butadiene styrene.  Blank Flanges are used to create a seal at the end of a length of pipe of the same diameter, with the...

uPVC Blank Flange PN16 are made from unplasticised polyvinyl chloride. Blank Flanges are used to create a seal at the end of a length of PVC pipe of the same diameter, with the use of...

Full face Flanges are used to create a secure joint between two lengths of PVC pipe with the use of two backing rings, a stub gasket and nuts and bolts.  Our PVC pressure pipe range...

Our full face BS EN1029-1 flanges are available in sizes 1/2" or 20mm to 8" or 225mm. These stub gaskets are made from ethylene propylene diene terpolymer. 3mm Thickness  

Our full face BS10 Table D/E gaskets are available in sizes 1/2" to 6". These gaskets are made from ethylene propylene diene terpolymer. Thickness - 3mm

These IBC gaskets are made from ethylene propylene diene terpolymer. EPDM Can be used on all flange materials with the PN16 dimensions MAX TEMP 80° - WRAS Approved  

1.5mm Novus Supra To suit ANSI 150, IBC, Max Temperature 350°C BS 7531 WRC, Non-asbestos.